Proven Ways to Remove Stains From Sarees

Stain – just a small spot on anything, right? No, this is not just a small spot, but a big spoiler for anything. Even a six yards long beautiful saree can lose its beauty due to a small stain of oil, protein, grease or fruit juice.

Sarees are the most worn outfit by the women in India. Be it a pooja at home or a huge wedding celebration, saree is the preferred choice for ethnic wear. From unmarried girls to old age ladies, everyone loves to flaunt a classy and elegant look in this traditional wear.

Being the preferred outfit in functions, traditional celebrations and festivals, chances of getting these stained are very high. Not just the festivals or parties, women who wear sarees as an everyday outfit also face the problem due to oil, turmeric and other such stains which are common when they work in the kitchen.

No matter whether it is a fancy crepe saree or a silk saree, removing the stain from them is equally difficult. The delicate zari work, embroidery, and prints further make it difficult to remove the stains. While rubbing them, there is always a fear of the embroidery or the beading getting ruined.

Don’t let the stain take away the beauty of your expensive sarees. Here are some helpful and full proof stain removal tips.

Identifying the stain type:

The first step in the stain removal process is to identify it. As different chemicals and stains have varied reactions and a minor mistake is a selection of the stain removal product can make it more stubborn and pathetic. So, first, you should identify the stain like whether it is of grease, tea or perspiration.

Grease stain removal

Any stain caused by oil-based products like refined oil, cooking oil, lipstick, butter or margarine come in the category of grease stains. The important point to remember when removing these stains is that don’t damp the saree in water or detergent. The right technique is to first draw out the grease with talcum powder and then remove the powder with a soft brush.

Protein stain removal

Protein stains are usually caused by sweat, blood, deodorant or some food items. These are the most common stains for you have no control on perspiration. Besides common, these are also the most stubborn stains to remove from silk and designer crepe sarees. To remove these stains, first, dab a cotton bud in liquid detergent and use it on the affected area. Leave the detergent on the stain for around 30 minutes and then wash the saree with cool water.

Coffee and tea stain removal

If you have small kids whom you need to pick in your lap, the chances of getting such stains increase more. The worst part about these stains is that these spread quickly and spoil the whole fabric leaving dark marks on the beautiful saree. An effective tool to get rid of caffeine stains is vinegar. Mix three tablespoons of distilled vinegar with equal amount of normal water. Clean the affected area either with a sponge or a cloth. You can also dab the stain, but make sure you don’t rub it. To get the best results, prefer using pure vinegar instead of a diluted version.

Point to remember when removing stains from the sarees

There are some points you should keep in the mind when cleaning expensive sarees. First, never wash two different sarees together. If you have to remove stains from silk saree and designer tussar saree, wash them separately to avoid color blending.

Second, never use bleach on the sarees as the harsh chemical can spoil the fiber while leaving yellowish marks on the saree.  Hope you find these tips helpful to keep your beautiful and designer sarees stain free.

from http://monalisaofblogging.com/proven-ways-to-remove-stains-from-sarees

How do badges give a reputation and identity to company professionals

Badges are not just worn by school children, but badges also provide identity to company professionals as well. In fact, the badges also provide group solidarity and community identity, as they give a common identity to the cadres of an army, or to the children of a school or an institute. There are numerous ways in which you can customize badges, and in this connection, you can also talk to the designing experts to get your badges ready to be used on different occasions. There are also many online groups and portals, where badges have been made mandatory for discussions and group activities that go on a certain website:

• A badge is generally a device or an accessory that defines the goals and agendas of an organization or an institution. In the ancient times, the use of badges stood for giving appraisal to the people regarding their sports performance, or regarding any other activities in which they excelled.

• Badges can be made of different materials, they can be of different shapes, and they can be of the same nature as the school monograms. For police and fire services, badges generally symbolize oath or taking an oath to fulfill the duty of an officer or an employee.

Buy badges which have different customizations, colors and designs:

Now with the advancement in technology, you do not always have to go to different shops to buy badges, as you can buy these badges from the online stores also. There are multiple collections that are available and you can select your own design, or talk to the customer service cell to give you the customized badges according to the design that you have chosen:

• The color, cut, shapes and design of the badges can be incorporated according to the client’s demand, and you can get the basic embellishments also for your custom badges and then use them accordingly as part of your company or an institution.

• Comics’ badges are quite popular with children, so you can try out the Pokemon badges, the pictures of little animals engraved on the badges, and also you can customize badges with their favorite carton character so that the children get fascinated with the colorful images and their impact.

• Flash badges, Looney tunes and Batman badges have also become quite common especially among all those children who do not want to go to schools, and they get fascinated with these designs, colors and embellishments that are printed on the badges.

What are the facilities of buying from an online portal?

When you buy badges online you do not have to go to different shops and search for badges that can otherwise break or chip off. Apart from this, when you buy badges from the online stores, you will get multiple options, colors, textures, designs and materials and you can choose these badges accordingly. There are many ways in which you can customize the use of badges, and in this connection, you can compare the price quality and the designs from numerous online stores. You can buy badges from the online stores, you will get loads of options regarding payment through the credit or the debit card, or else, you can also pay them through cash on delivery.

There are many websites for badges, which sell their own products online, and you can get the delivery right when you sit at home, you do not have to wait for the stock to arrive, as you can get many new stocks already from the online stores.

from http://monalisaofblogging.com/how-do-badges-give-a-reputation-and-identity-to-company-professionals

The ultimate shopping guide for your trip to Toronto

Shopping is an integral part of visiting a new destination, especially if you are going somewhere far overseas or a place with a complete cultural difference than your region. While on your stay in Toronto, you will be spoilt for choices on where and what to shop. This article talks about some of the top marketplaces and shopping spots in the city.

Toronto is undoubtedly one of the top cities in the world. It is modern, beautiful and you will see everything you would expect in a major global city. From towering modern buildings to age old monuments, pristine lakes and urban forests, you will not regret booking one of those Delhi to Toronto flights to spend a vacation here. One of the best part of visiting this city is the abundance of shopping opportunities within the city. From modest bohemian shopping to extraordinarily fancy and pricey items, Toronto satisfies the shopping needs of everyone. Here are some of the top markets and shopping spots in Toronto.

The Hudson’s Bay Company

You cannot have gone to Toronto and missed the Hudson’s bay, Canada’s oldest retail partnership which has now spread out to most major countries. The main store is right opposite the Toronto Eaton Center at the intersection of Bay and Queen. The Bay (as it is known there) is a decent out-dated retail establishment including garments to family unit and household items  and a spot to have a lunch with the family.

St. Lawrence Market

One of the top markets in Toronto, the St Lawrence market has about 50 stores all related to food, meaning selling food items and some restaurants and eateries to the south, and the Northern part of the market you will find the Saturday farmers market. If you are in Toronto on a Sunday, you should definitely check out the antique market which happens on Sundays alone where merchants come and sell antique items on the Northern part of the market.

The Toronto Eaton Center

Set in the heart of Toronto’s downtown, the Toronto Eaton Center is probably one of the most popular areas in the entire city housing over 250 stores at a single stretch. The best part about this place is that, you do not necessarily splurge while shopping here. There are ample shopping opportunities for people shopping on a budget or even for people looking to spend big.

Chinatown

Toronto’s Chinatown is similar to any other Chinatown you will see in major cities around the world. Everything from the best Chinese food, apparels, household items to interior household decors like small handicrafts or Chinese lanterns can be found here. Apart from the authentic Chinese cuisine, you will also get some good Vietnamese food here and various other Asian cuisines.

Queen’s Street

Cutting through East/West Toronto, this popular street in Toronto is a perfect place to shop in Toronto if you are in search of some trendy and chic clothing. Apart from the shopping experience, you can also gorge of the yummy food from the line of restaurants in this part of Toronto and also check out its antique stores. The variety this place makes it one of the best places to visit in Toronto.

You will be spoilt for choices when it comes to shopping in Toronto. Get ready to come back home with another baggage to add to your luggage!

from http://monalisaofblogging.com/the-ultimate-shopping-guide-for-your-trip-to-toronto

Tips on Maintaining Diesel Turbo Engines

You must remember that all kinds of engines need care and maintenance and the same applies to your diesel turbo engines. There are high chances that the conventional gas auto vehicle that you have is not getting the right maintenance because of not changing the oil or even because your engine is not getting sufficient care. Remember that changing the oil of your vehicle is essential for engine life because the more you delay, the poorer your engine life would be. Here are some aspects or tips on maintaining your engine life.

1. Change filters

As a thumb rule, you must always ensure that you are changing the filters of your vehicle on a regular basis. Often, a dirtier fuel or filter can lead to poorer performance and also damage your diesel turbo engines. This happens because there are dirt components getting inside your vehicle. Any type of dirty fuel would cause clogging in your fuel injection system. Check the fuel injector of your engine to ensure that it is functioning aptly. Also, read through the manual to see if there is anything additional that you should do here.

This applies for the air filters too. Since these engines use up a lot of air, it is recommended that you also inspect and check this aspect of your turbo engine. If not, then your overall vehicle functioning would be acutely damaged. This can be done on your own too and you just need to browse through the diesel turbo engine and then take things from there by reading the manual.

2. Check on regular intervals

Often, a mistake that a lot of people make with the diesel turbo engine maintenance and care is that they don’t check on these on a regular basis. As a result, there is a delay and this could lead to worsening of the situation. If you are not taking your car for regular servicing or delaying the required checks, you could be hampering your cars performance.

3. Don’t race immediately

Another crucial aspect that must be considered here is not giving your car too much race when you are starting the engine. Be it any kind of engine, the car should not be given race immediately and you should give it at least 5-10 seconds before fueling up or speeding. Not doing so would mean that you are causing damage to the diesel turbo charger.

4. Check glow plugs

Checking the glow plugs is another little thing that can elongate the life of your turbo engine. Ignition of your diesel engine would need to be compressed properly for generating heat and often the fuel that is used is not enough for the same. At times like these, the glow plug comes into use and this usually happens during the winter period. So prior to the winter season, give your glow plug a check.

5. Cooling systems

Along with your glow plugs, it is very obvious that your diesel turbo engines are also prone to very high compression pressure. This happens because of the heat generated and thus it also needs ample cooling, so make sure there is enough coolant available.

6. Diesel oil

There is diesel lube oil found in your diesel turbo engine that should be changed on a regular basis. Ideally, it is recommended that one changes the turbo oil at least once every 100 hours so that by products like carbon is not getting constantly deposited on the same. If this continues to happen, it would definitely ruin your engine.

So keep these aspects in mind when taking care of your turbo engines. Want to know more about diesel turbo! Get some more information by visiting this link.

from http://monalisaofblogging.com/tips-on-maintaining-diesel-turbo-engines

Top 5 mistakes which you must avoid while you hire a car mechanic

If you have your own car then you might know about the mechanical repairing of the automobile spare parts. Even you need to hire some car mechanics for this task and they will suggest you with several things along with the best possibilities for your car. But before hiring the car mechanics, you need to know about few things and then you have to read your car manufacturer’s manual and understand the exact requirement of your car accordingly. It is very difficult to choose the best car mechanic because you can find many car repairing and servicing stations in your locality, and all of them can assure you about the best services from their part.

How to avoid mistakes and fake promises?

Now you need to know about some tricks of car mechanics which they suggest to you, but you need to avoid these tricks and take your own decision according to your exact requirement and hire the best car mechanic with reference to the budget that you have.

1. Firstly, these fake car mechanics can suggest you some replacement of spare parts because they install many cheap quality car parts. In this regards, you need to know that what type of spare parts you require for your car. Apart from that, these car mechanics always suggest you to replace your original car parts with cheap quality parts because, they sell these spare parts at a huge price and they also resell the original spare parts of the car. So they will gain their income in this dual mode and they will damage your car very soon. You need to avoid these car mechanics and choose the certified mechanics who deal with original spare parts and they have to explain the cause of the replacement as well.
2. Secondly, some car mechanics do not notice your major car problems related to engine and brakes. They suggest you to change some spare parts and oil and they charge you huge a huge amount for this task.
3. When you hire the car mechanics, you need to ask them about the estimated time. If there is any major issue then they can suggest you to keep your car overnight at their work station. But for minor repairing, they can try to keep your car overnight also because they charge you with an additional cost as night charges, and they increase the overall repairing cost also.
4. It is suggested to ask your car mechanic about the total cost of repairing and you have to take the estimated cost as written in their official letterhead. They tend to increase the charges after few days and you have to spend a huge additional cost for the second-time repairing. If they generate the written document then they cannot increase this cost easily.
5. You have to enquire about the warranty. Most of the car mechanics provide minimum six months warranty on their mechanical works and company warranty shall be empanelled as their norms. If your car mechanic does not provide you with any warranty then you must avoid this mechanic.

How to hire the best car mechanics?

If you want to hire some best car mechanics then you can search on the internet and you will find their website with customer feedbacks. You can easily compare their price range online also.

• You have to check their certification. The car mechanics need to get certificates issued by the automobile industry and institutions, and you have to check their mechanical qualification also.
• Then you have to check their experiences in this field and you must hire some experienced mechanics for your car, because they can easily handle any problems.

Apart from that, before hiring the mechanics, you need to ask them about the insurance and company guideline accordingly.

from http://monalisaofblogging.com/top-5-mistakes-which-you-must-avoid-while-you-hire-a-car-mechanic

How to Organize Board Meetings for Tech Startups

It starts with a small group of programmers and a big idea. Tech startups are today’s most exciting business ventures, but they quickly meet unforeseen challenges. Forward-thinking entrepreneurs get a head start on good management and governing practices by bringing in experienced advisors or directors. Small teams of software designers often lack the critical business skills new companies need to navigate high-risk situations that could jeopardize the whole company. While a startup’s board may consist of the founder and investors, one of the first steps toward good governance is bringing on a chairperson with business experience. Keep your chair up to speed and engaged by implementing business portal software from the beginning. Unlike most traditional corporations, tech startups need experienced chairpersons to take an involved approach to oversight.

The next thing you need to know is how to organize a board meeting. It’s routine for most established corporations, but if you’re new to business, some pointers can help. Your schedule for meetings should be drafted months in advance, determining deadlines for financial reports and important memos. You can visit Aprio for more information on last minute updates and meeting invitations. Directors are responsible for ensuring that a company’s actions are in compliance both its own policies or bylaws and municipal, state or provincial and federal legislation.

Before a meeting, you (or your administrator) will have to compile board material binders including the agenda, legal requirements, draft minutes of past meetings and financial statements. Digital board portals are the fastest and most secure way to distribute board materials to directors. Administrators can organize these sections in tabs that are easy to read on tablets and laptops. Print may still play a role in your near-paperless office, however. Financial statements in particular are cumbersome to read on most devices’ screens, so even if they are initially distributed digitally, make print copies ready for reference at the meeting itself.

Just before meetings, distribute agendas to all attendees. An agenda itemizes every discussion point and lists the member responsible for it, whether it’s the chairperson, secretary, CEO or CFO. Archived minutes from previous meetings should be also be distributed only a day or two beforehand. Archiving documents is simple and straightforward with Aprio Boardroom, one of the portals that big data companies like Numeris and Navarik have adopted.

Implementing board portal software will seem like second nature for tech startups. However, it’s important not to discount user experience and balance function with ease-of-use. The experienced executives who can provide valuable business guidance to your company may not be quite as tech-savvy as your programming team, even if you’re not interested in people resistant to digital workspaces. Make secure file-sharing, digital signatures, and remote resolution voting simple with a platform like Aprio’s. The sooner you adopt best practices for governance, the better equipped you’ll be to make the leap into a mid-size enterprise. Chairs require simple and instant access to financial reports, memos, and motions to guide a young company’s growth. Invest in board portal software sooner than later.

from http://monalisaofblogging.com/how-to-organize-board-meetings-for-tech-startups

What You Have to Know before Shopping for Men’s Wedding Bands

A great amount of thought goes into selecting an engagement ring. However, when it comes to the wedding band, most men realize they are completely clueless on the options. If you are in this predicament, there are a couple of considerations you can make to get off on the right foot.

Width

When selecting a wedding band, two things are given precedence; budget and fitting. One area that most men completely ignore is that on the width. Wider rings tend to be more expensive because more material is required to make them.

Even so, it is possible to balance size and price by selecting a metal that is within your budget. For example, in place of platinum or white gold, you can go for palladium which is similar. All in all, you must focus on quality, value, durability and maintenance needs when buying a wedding band.

Metal choice

When it comes to metals, you will be spoilt for choice when shopping for the right ring. The traditionally used metals include white gold, platinum, yellow gold, rose gold and palladium. Each metal has its pros and cons.

• Platinum. This is more durable and more expensive. On the flipside, it may cause skin reactions in some men.
• White gold. This is gold that has been plated in rhodium. It is less expensive when compared to platinum.
• Yellow gold. This has a delicate, warm glow and is the classic option when it comes to men’s wedding bands.
• Palladium. This gives a similar expensive look to platinum but costs much less than white gold and platinum.
• Rose gold. This is a less common choice that exudes a vintage effect.

Fit

The wedding ring is available in a selection of edges, from a curved to a flat edge. The ideal ring is one with rounded edges. It has a better feel on the finger. You need to try on a number of rings to find the perfect fit for you.

Finish

Which is the best texture? The finish is what describes the texture of your band. Your options will include the following:

• High polish. This is the typical choice. It has a reflective finish.
• Matte. This has an understated, modern feel and is less reflective.
• Combination. The finish on this option combines high polish and matte textures.
• Hammered. The texture looks like a hammer pounded the texture to form a textured effect. If you want a unique yet riveting look, this is a great choice.

Detailing

A few years back, the options in men’s wedding rings never went far beyond metal choice. Today, the options are unique. They are tailored to add or even match your style with such objects as diamonds or sapphire accents such as sparkling gems or Celtic knot designs. Weed through you options in detailing before settling for a band.

Engraving

Whether you select a classic or inconspicuous ring, make sure you personalize it with engraving. Engravings can range from your wedding date to the initials of your finance to song lyrics and so much more.

The options in wedding bands are unlimited. Be true to yourself and pick a custom design.

from http://monalisaofblogging.com/what-you-have-to-know-before-shopping-for-mens-wedding-bands